Stealth Cam Prowler HD Motion Trail Camera – A User Guide

Exploring wildlife and wildlife with the stealth cam Prowler HD Digital Trail Camera has by no means been so superior.

Stealth Cam’s Prowler HD Digital Video Scouting Recorder gives full HD video recording capabilities and an 8MB nonetheless digicam. The machine additionally stamps the time/date/moon section and temperature on every file to offer invaluable discipline data. The Prowler information not solely video and nonetheless photographs, however all audio as properly.

With 54 infrared emitters, the Prowler HD can seize nighttime photographs and topics as much as 40 ft away. It has adjustable video recording occasions. (from 5 seconds to 5 minutes)

The right way to arrange your Prowler HD

The Stealth Cam Prowler is available in a field with a strap, directions and an information switch cable. You will have 6 good high quality C cell batteries and an SD reminiscence card, of which you should buy a 4GB card for round £7.00. Working the digicam at full decision with a 4GB card provides you 1600 excessive decision 3400 x 2550 nonetheless photographs or 112 HD video clips.

positioning of the digicam

It’s endorsed to mount the digicam 1.5m above the bottom with the lens pointing barely downwards. Be careful for the rising solar and place your digicam to face north or south and take away any leaves in entrance of the lens. Thread the strap by way of the digicam, there are two “belt loops” on the again of the unit and wrap the straps round a tree or submit however don’t tighten but.

Intention the digicam in order that it’s pointing on the space you wish to cowl with the IR. Keep away from inserting the digicam within the path of the rising or setting solar as this will result in overexposure of the photographs. Slide the digicam to the aspect of the tree and look by way of the viewfinder on high of the digicam to test the realm coated by the lens.

When happy, tighten the straps and fasten the belt by way of the buckle for a comfortable match. For small floor recreation, a picket wedge positioned on high of the digicam ensures that the lens factors extra in the direction of the bottom and covers the bottom space higher.

testing operation

1. When you’re happy with the positioning of the digicam, open the digicam case and activate the digicam.

2. Press the check button, the digicam will then go right into a 1 minute countdown mode, sufficient time to exit of protection space.

3. Stroll by way of the focused detection space and make sure the PIR detects your presence, that is indicated by a inexperienced LED illuminating.

4. I am utilizing Millie, my lab pup, as a check canine, however ask her to stroll previous the digicam and test if she’s taking pictures a smaller object reasonably than a 15 stone human!

5. When you’re happy that the positioning of the digicam is adequate to cowl the specified space, you might be prepared to start.

Programming the digicam to function

1. When you might have accomplished the testing course of, you may arrange the digicam. You need to now resolve whether or not you wish to seize video footage or nonetheless photographs. Keep in mind that in nonetheless mode you may have a burst mode of 1-9 consecutive frames!

2. Open the digicam and insert your clean SD card into the SD card slot on the aspect of the interior digicam physique.

3. Activate the digicam and set the digicam to both digicam or video mode in keeping with your handbook. You additionally have to set the length of the video or the variety of photographs you need the digicam to take without delay. In video mode you may function the digicam in HD, D1 or VGA mode, with HD being the highest quality however with much less picture dimension per card. In digicam mode, in fact, as with movies, you may select excessive, low or low decision, the decrease the decision, the extra photos can match on a reminiscence card. We set the video length to twenty seconds and the timeout to 1.

4. The Timeout setting permits you to inform the Stealth Cam how lengthy to “sleep” between triggers. This ought to be set pretty low in case you are utilizing a big capability reminiscence card as there may be nothing worse than a deer transferring into body, then stepping out of body for a second to graze once more in entrance of a sleeping recreation digicam, it doesn’t get up once more for 10 minutes, throughout this time the deer has taken it to new pastures.

5. You also needs to set the time and date at this level, which is essential when you watch the video footage at a later time.

6. On the finish of every program setting choice, you may press MENU to exit the menu and return to the digicam standing studying display. You now have 60 seconds to shut the digicam and exit the PIR zone.

7. Be sure you shut each shutters tightly, shut the digicam and exit the realm. The digicam is now able to document animal motion.

8. Infrared lights up at evening.

9. You’ll obtain coloration photographs in the course of the day.

Again to the digicam

While you return to the digicam, you may instantly see if it has been triggered by the counter on the entrance.

If you happen to’re fortunate, you may have both nonetheless or video footage of wildlife or passers-by.

1. The Stealth Cam Prowler HD comes full with a cable to obtain to your PC. Nonetheless, this implies it’s important to detach the digicam and take it dwelling with you. It is best to have two SD playing cards so you may depart one clean for swapping and exchange the complete SD card.

2. We have now two SD playing cards, so open the digicam and switch off the digicam.

3. Take away the present SD card, exchange it with one other clean card, make any vital adjustments to the menu, e.g. B. decision or time and many others. Then make sure that the digicam is on and shut it for the subsequent day.

Obtain your footage

1. We introduced our Prowler again to our desks and eliminated the SD card for downloading.

2. Take away the SD card after which insert it into your laptop computer’s card reader. In case your PC does not have a constructed-in SD slot, you should buy a USB card reader for a couple of bucks.

3. After you have inserted the cardboard, your PC will learn the data.

4. Open the SD card information folder and you’ll view the pictures or movies in your desktop or save them for later time and even add them to You Tube to share with the world.