(as of Feb 02,2023 11:32:22 UTC – Details)
Specification 12 Type 12 Type 156 Type 18 Type 7 Type 25 Type Quantity 54 80 3120 840+120 1 3+1+140+65+120+1+1 Kit Name Bipolar and Darlington Transistors Kit MOSFET Transistor Kit 1/4W Resistor Kit Breadboard Jumper Wire Kit Power Module Kit Breadboard Kit
Specification: Input: 100-240VAC, 50/60Hz Output: 9W max, 9V, 1A (1000mA) Connector Size: ID: 2.1mm Compatible with 2.5mm. ; Outer Diameter: 5.5mm DC Tip Polarity: Center Positive (+) Cable Length: 0.92m/ 3.0ft Multiple protections with smart chip of 9V 1A power supply to ensure safety and stability: Over-temperature auto shut-off , short circuit protection, under voltage protection, over voltage protection and over current protection. Sufficient 9 W output power and stable 9 V output voltage protect your electronic devices from destruction. Breadboard power supply module: output two road independent control, switchable 0V, 3.3V, 5V. Input voltage: 7-12V (DC) or 9V battery. Output Voltage: ~3.3V/~5V; Output Current: 700mA (Max) Arduino Board Solderless Breadboard, etc. Equipped with a battery clip for easy battery power. There is a green LED to indicate the presence of power and an ON/OFF latching switch to control power to the board. This is a plug in power supply and just plug the headers under the board into the breadboard. Once plugged in, the voltage rails on either side of the breadboard then provide power. Then use the yellow jumpers to select the desired voltage level. This is a regulated 3.3v, 5v dual output board and you can have both voltages on either rail on the breadboard which is very useful. Alligator Clip Test Leads 11.8 inch (300mm) jumper cable with an alligator clip on one end and female jumpers on the other for Arduino, Raspberry Pi, Orange Pi, portable circuit projects, or a breadboard experiment. Banana plug: Banana plug can be self-made according to your needs, combined with the free DuPont cable, banana plug to plug or banana plug to socket test line can be realized. ，Suitable for connecting a cable to breadboard of power supplies, LED strips, multimeters and lily pad. Just connect a cable from power supplies, LED strips, multimeters, lilypad, etc. to the breadboard. In combination with the free DuPont male to male / male to female cable dock, it can be extended and converted from male to female.
Product Dimensions: 2.5 x 1.5 x 0.6 inch; 4.66 ounces
First Availability Date : December 7, 2022
Manufacturer : Minidodoca
9V 1A Power Supply: Input 100V-240V 50/60Hz; Output 9VDC, 1A (1000mA) max; Works with devices that draw less than 1A such as B. 0.5A 0.7A 0.9A 1A, with 5.5mm x 2.5mm plug. The outer diameter of the DC output connector is 5.5mm, the inner diameter is 2.5mm. Compatible with 2.1mm.
Breadboard power supply module: output two road independent control, can switch to 0V, 3.3V, 5V; Input voltage: 6.5-9V (DC) or 9V battery. ;Output Voltage: ~3.3V/~5V; Output current: 700mA (max); With 9V battery snap power cable T-type 5.5 x 2.1mm male; Fits: MB-102 Breadboard; Arduino Board Solderless Breadboard etc.
Alligator Clip Test Leads: 11.8″ (300mm) jumper cable with an alligator clip on one end and female jumpers on the other for Arduino, Raspberry Pi, Orange Pi, portable circuit projects, or a breadboard experiment.
Banana Plugs: Banana plugs can be made according to your needs in combination with the free DuPont cable. Banana plug to plug or banana plug to socket test lead，Suitable for connecting a cable to breadboard of power supplies, LED strips, multimeters and lilypad.
Package Contents: 1 Pcs 9V 1A Adapter + 1 Pcs Breadboard Power Module + 1 Pcs Battery Clip + 2 Pcs Alligator Clip Test Leads (Color Random) + 2 Pcs Banana Plugs + 5 Pin Male to Male DuPont Cable + 5 -pin male to female DuPont cable